CHLDG - B-1616 UN-REEL 5-MINUTE EPOXY
- MSDS: CHLDG
- Manufacturer: ITW DEVCON
- Product Name: B-1616 UN-REEL 5-MINUTE EPOXY
- National Stock Number: 8010-00D007263
Product Identification
Product ID:B-1616 UN-REEL 5-MINUTE EPOXY
MSDS Date:10/01/1985
FSC:8010
NIIN:00D007263
MSDS Number: CHLDG
Responsible Party
DANVERS, MA 01923
US
Emergency Phone: 804-463-3476/617-777-1100
Info Phone: 617-777-1100
Cage: 0RZG3
Contractor
Telephone: 978-777-1100
Cage: 0NBN5
Ingredients
2,4,6-TRIS(DIMETHYLAMINO METHYL) PHENOL
CAS: 90-72-2
RTECS: SN3500000
Fraction By Weight: <5%
Hazards
LD50 LC50 Mixture:ORAL LD50 RAT, >1600MG/KG.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE:MILD TO MODERATE IRRIT.SKIN:NOT AN
IRRITANT.INHAL:NO DATA.CHRONIC:PROLONGED/REPEATED OVEREXPOSURE MAY
CAUSE ALLERGIC SENSITIZATION.
Effects of Overexposure:MILD-MODERATE EYE IRRIT, ALLERGIC
SENSTIIZATION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYE:FLUSH W/CLEAR WATER FOR 15MNS.SKIN:WASH THOROUGHLY
W/SOAP/WATER.INGEST:CONTACT PHYSICIAN.DONT INDUCE
VOMITING.INHAL:REMOVE TO FRESH AIR.
Fire Fighting
Flash Point Method:TCC
Flash Point:>500F,>260C
Autoignition Temp:Autoignition Temp Text:NP
Lower Limits:NA
Upper Limits:NA
Extinguishing Media:CO2, FOAM, OR DRY CHEMICAL.
Fire Fighting Procedures:FIREFIGHTERS SHOULD WEAR SELF-CONTAINED
BREATHING APPARATUS & PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:ABSORB SPILLAGE ON INERT MATL & DISCARD IN
SUITABLE CONTAINERS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP HANDS AWAY FRM EYES WHEN HNDLG
MATL OR BEFORE WASHING AFT USE.WASH THROUGHLY AFT
USING-PARTICULARLY BEFORE EATING/SMOKING.STORE IN COOL DRY PLACE
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NONE NEEDED IN NORMAL USE W/PROPER VENTILATION.
Ventilation:GENERAL MECHANICAL IS SATISFACTORY.IF ODOR IS DISAGREEABLE,
USE LOCAL EXHAUST.
Protective Gloves:DISPO GLOVES FOR PROLONGED USE.
Eye Protection:NOT NECESSARY IN NORMAL USE.
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH THOROUGHLY AFTER USING-PARTICULARLY BEFORE
EATING OR SMOKING.
Supplemental Safety and Health
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:NA
Melt/Freeze Pt:M.P/F.P Text:NA
Decomp Temp:Decomp Text:NP
Vapor Pres:NIL
Vapor Density:>1
Spec Gravity:1.64
pH:9.5
Viscosity:NP
Evaporation Rate & Reference:<1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:WHITE PUTTY RUBBIN, LOW ODOR
Percent Volatiles by Volume:0
Corrosion Rate:NP
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:EXOSURE TO OPEN FLAME OR EXCESSIVE HEAT.
Hazardous Decomposition Products:OXIDES OF CARBON, SULFUR, AND
NITROGEN.
Conditions to Avoid Polymerization:HEAT IS GENERATED WHEN MIXED W/EPOXY
RESIN.USE CAUTION WHEN MIXING LARGE QUANTITIES.
Disposal
Waste Disposal Methods:REMOVE TO WASTE DISPOSAL FACILITY OPERATING IN
COMPLIANCE WITH STATE/LOC REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.